 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Sun Ray Detector Electronics |
| THE BEST AFTER MARKET ACCESSORIES MADE! |
FISHER ACCESSORIES
COIN$TRIKE, ID EDGE
SUN RAY INVADER™ CS-5 5.5" Concentric Coil
(Compatible with the Fisher Coin$trike & ID Edge Metal Detectors)
(Compatible with the Fisher Coin$trike & ID Edge Metal Detectors)
Sun Ray Detector Electronics is proud to announce our new Invader™ series
of after market accessories for Fisher metal detectors! The new Sun Ray
Invader CS-5 is a 5.5" concentric coil which is compatible with the Fisher
Coin$trike and with the ID Edge Coil Adaptor (see upper right photo), is
compatible with the ID Edge and is the result of requests for a smaller coil by
Fisher Coin$trike/ID Edge users. Here are some of the features of the CS-5:
Maximum target separation in extreme high trash conditions!
Excellent depth capabilities!
Waterproof/submersible!
Light weight!
Comes with 42" very flexible custom cable!
Coil cover included.
ID Edge Coil Adaptor allows the CS-5 (and all CoinStrike coils) to be used on
the ID Edge!
FULL 12 MONTH WARRANTY!!!
Only $189.95 + S&H
of after market accessories for Fisher metal detectors! The new Sun Ray
Invader CS-5 is a 5.5" concentric coil which is compatible with the Fisher
Coin$trike and with the ID Edge Coil Adaptor (see upper right photo), is
compatible with the ID Edge and is the result of requests for a smaller coil by
Fisher Coin$trike/ID Edge users. Here are some of the features of the CS-5:
Maximum target separation in extreme high trash conditions!
Excellent depth capabilities!
Waterproof/submersible!
Light weight!
Comes with 42" very flexible custom cable!
Coil cover included.
ID Edge Coil Adaptor allows the CS-5 (and all CoinStrike coils) to be used on
the ID Edge!
FULL 12 MONTH WARRANTY!!!
Only $189.95 + S&H
SUN RAY INVADER™ CS-1 TARGET PROBE
(Compatible with the Fisher Coin$trike & ID Edge Metal Detectors)
(Compatible with the Fisher Coin$trike & ID Edge Metal Detectors)
Sun Ray Detector Electronics is proud to announce our new Invader™ series
of aftermarket accessories for Fisher metal detectors! The new Sun Ray
Invader CS-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Fisher Coin$trike & ID Edge users. We have received many
requests for in-line target probes by Fisher brand users for some time due to
the popularity of our quality in-line probes for Minelab, White's and Garrett
metal detectors. Now Fisher owners can enjoy the same benefits a quality Sun
Ray in-line probe has to offer! Here are some of the features of the CS-1:
Fully compatible with the Fisher CoinStrike & ID Edge models with the flip of a
switch! The CS-1 is precision built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep
depending on detector model, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely
along arm rest for easy access. CS-1 probe and cable weigh approx. 6 oz. CS-
1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. -
approx. 11 oz total!
While the CS-1 probe is waterproof the switch box is water resistant and must
not be submersed. (We use the same connectors as Fisher.)
Installation requires no tools or modifications to the detector. Switch box and
probe clips are attached by removable velcro lined clips.
The CS-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions!
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a very flexible 30" straight cable
with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and
probe are never on at the same time.
New "Detector Selection Switch" allows you to switch between CoinStrike &
ID Edge. Also allows the use of both CoinStrike & ID Edge coils
interchangeably between detectors
of aftermarket accessories for Fisher metal detectors! The new Sun Ray
Invader CS-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Fisher Coin$trike & ID Edge users. We have received many
requests for in-line target probes by Fisher brand users for some time due to
the popularity of our quality in-line probes for Minelab, White's and Garrett
metal detectors. Now Fisher owners can enjoy the same benefits a quality Sun
Ray in-line probe has to offer! Here are some of the features of the CS-1:
Fully compatible with the Fisher CoinStrike & ID Edge models with the flip of a
switch! The CS-1 is precision built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep
depending on detector model, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely
along arm rest for easy access. CS-1 probe and cable weigh approx. 6 oz. CS-
1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. -
approx. 11 oz total!
While the CS-1 probe is waterproof the switch box is water resistant and must
not be submersed. (We use the same connectors as Fisher.)
Installation requires no tools or modifications to the detector. Switch box and
probe clips are attached by removable velcro lined clips.
The CS-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions!
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a very flexible 30" straight cable
with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and
probe are never on at the same time.
New "Detector Selection Switch" allows you to switch between CoinStrike &
ID Edge. Also allows the use of both CoinStrike & ID Edge coils
interchangeably between detectors
CS-1 switch box is conveniently mounted on detector pole attachment in a
neutral position (for both right and left hand users) and to prevent toggle from
being accidentally switched or bumped by user or damaged by tree limbs,
brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the CS-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
neutral position (for both right and left hand users) and to prevent toggle from
being accidentally switched or bumped by user or damaged by tree limbs,
brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the CS-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
SUN RAY INVADER™ FZ-1 TARGET PROBE
(Compatible with Fisher CZ model detectors)
(Compatible with Fisher CZ model detectors)
CZ Models
SUN RAY INVADER™ FZ-1 TARGET PROBE
Sun Ray Detector Electronics is proud to announce our new Invader™ series
of aftermarket accessories for Fisher metal detectors! The new Sun Ray
Invader FZ-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Fisher CZ users. We have received many requests for in-
line target probes by Fisher brand users for some time due to the popularity of
our quality in-line probes for Minelab and White's metal detectors. Now Fisher
owners can enjoy the same benefits a quality Sun Ray in-line probe has to
offer! Here are some of the features of the FZ-1:
Fully compatible with all Fisher CZ models (except original CZ-6 & CZ-20)! The
FZ-1 is precision built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep
depending on detector used, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely
along arm rest for easy access. FZ-1 probe and cable weigh approx. 6 oz. FZ-
1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz.
- approx. 11 oz total!
While the FZ-1 probe is waterproof the switch box is water resistant and must
not be submersed. (We use the same connectors as Fisher.)
Installation requires no tools or modifications to the detector. Switch box and
probe clips are attached by removable velcro lined clips.
The FZ-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions! (Above
features may vary from one CZ model to another and depth reading will be off
due to the probe's diameter, which is normal.)
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a very flexible heavy duty custom
30" straight cable with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and
probe are never on at the same time.
FZ-1 switch box is conveniently mounted on detector pole attachment in a
neutral position (for both right and left hand users) and to prevent toggle from
being accidentally switched or bumped by user or damaged by tree limbs,
brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the FZ-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
Optional 50" in-line extension cable available for FZ-1 if hipmounting CZ
control housing - $29.95 + S&H
of aftermarket accessories for Fisher metal detectors! The new Sun Ray
Invader FZ-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Fisher CZ users. We have received many requests for in-
line target probes by Fisher brand users for some time due to the popularity of
our quality in-line probes for Minelab and White's metal detectors. Now Fisher
owners can enjoy the same benefits a quality Sun Ray in-line probe has to
offer! Here are some of the features of the FZ-1:
Fully compatible with all Fisher CZ models (except original CZ-6 & CZ-20)! The
FZ-1 is precision built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep
depending on detector used, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely
along arm rest for easy access. FZ-1 probe and cable weigh approx. 6 oz. FZ-
1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz.
- approx. 11 oz total!
While the FZ-1 probe is waterproof the switch box is water resistant and must
not be submersed. (We use the same connectors as Fisher.)
Installation requires no tools or modifications to the detector. Switch box and
probe clips are attached by removable velcro lined clips.
The FZ-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions! (Above
features may vary from one CZ model to another and depth reading will be off
due to the probe's diameter, which is normal.)
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a very flexible heavy duty custom
30" straight cable with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and
probe are never on at the same time.
FZ-1 switch box is conveniently mounted on detector pole attachment in a
neutral position (for both right and left hand users) and to prevent toggle from
being accidentally switched or bumped by user or damaged by tree limbs,
brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the FZ-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
Optional 50" in-line extension cable available for FZ-1 if hipmounting CZ
control housing - $29.95 + S&H
SUN RAY INVADER™ FX-1 TARGET PROBE
F75 & F70
Sun Ray Detector Electronics is proud to announce our new Invader™ series
of aftermarket accessories for Fisher metal detectors! The new Sun Ray
Invader FX-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Fisher F-75 & F-70 owners. We have received many requests
for an in-line target probe for the F-75. Now F-75 & F-70 owners can enjoy the
same benefits our quality Sun Ray in-line probes have offered users of
previous Fisher models! Here are some of the features of the FX-1:
Fully compatible with the Fisher F-75 & F-70 models only. The FX-1 is precision
built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending
on settings, operation modes, ground and moisture conditions!
New compact, light weight, waterproof/submersible 6" X 1" diameter probe
mounts nicely along arm rest for easy access. FX-1 probe and cable weigh
approx. 5 oz. FX-1 switch box, connectors, cable and two probe clips, etc.
weigh approx. 5oz. - approx. 10 oz total!
While the FX-1 probe is waterproof the switch box is water resistant and must
not be submersed.
Installation requires no tools or modifications to the detector. Switch box and
probe clips are attached by removable velcro lined clips.
The FX-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions!
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a 30" straight cable with strain relief
for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe
are never on at the same time.
FX-1 switch box is conveniently mounted on detector pole in a neutral position
(for both right and left hand users) and to prevent toggle from being
accidentally switched or bumped by user or damaged by tree limbs, brush, etc.
if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the FX-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
Sun Ray Detector Electronics has been manufacturing multi-frequency in-line
probes since 1997. Our design and production engineer has been designing
and building probes for over 11 years which include in-line multi-frequency,
stand alone as well as pulse and has designed and built pulse detectors and
circuits. The popularity of our in-line probes is well known in the metal
detecting industry and satisfied customers tell us our quality is second to none!
Field Tester Andreas Meyer of New Mexico shown here after testing the FX-1
on the F-75.
of aftermarket accessories for Fisher metal detectors! The new Sun Ray
Invader FX-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Fisher F-75 & F-70 owners. We have received many requests
for an in-line target probe for the F-75. Now F-75 & F-70 owners can enjoy the
same benefits our quality Sun Ray in-line probes have offered users of
previous Fisher models! Here are some of the features of the FX-1:
Fully compatible with the Fisher F-75 & F-70 models only. The FX-1 is precision
built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending
on settings, operation modes, ground and moisture conditions!
New compact, light weight, waterproof/submersible 6" X 1" diameter probe
mounts nicely along arm rest for easy access. FX-1 probe and cable weigh
approx. 5 oz. FX-1 switch box, connectors, cable and two probe clips, etc.
weigh approx. 5oz. - approx. 10 oz total!
While the FX-1 probe is waterproof the switch box is water resistant and must
not be submersed.
Installation requires no tools or modifications to the detector. Switch box and
probe clips are attached by removable velcro lined clips.
The FX-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions!
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a 30" straight cable with strain relief
for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe
are never on at the same time.
FX-1 switch box is conveniently mounted on detector pole in a neutral position
(for both right and left hand users) and to prevent toggle from being
accidentally switched or bumped by user or damaged by tree limbs, brush, etc.
if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the FX-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
Sun Ray Detector Electronics has been manufacturing multi-frequency in-line
probes since 1997. Our design and production engineer has been designing
and building probes for over 11 years which include in-line multi-frequency,
stand alone as well as pulse and has designed and built pulse detectors and
circuits. The popularity of our in-line probes is well known in the metal
detecting industry and satisfied customers tell us our quality is second to none!
Field Tester Andreas Meyer of New Mexico shown here after testing the FX-1
on the F-75.
SUN RAY INVADER™ FE-1 TARGET PROBE
(Compatible with the Fisher ID Excel Metal Detector)
(Compatible with the Fisher ID Excel Metal Detector)
Sun Ray Detector Electronics is proud to announce our new Invader™ series
of aftermarket accessories for Fisher metal detectors! The new Sun Ray
Invader FE-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Fisher ID Excel users. We have received many requests for
in-line target probes by Fisher brand users for some time due to the popularity
of our quality in-line probes for Minelab and White's metal detectors. Now
Fisher owners can enjoy the same benefits a quality Sun Ray in-line probe has
to offer! Here are some of the features of the FE-1:
Fully compatible with the Fisher ID Excel model only. The FE-1 is precision
built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending
on settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely
along arm rest for easy access. FE-1 probe and cable weigh approx. 6 oz. FE-1
switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. -
approx. 11 oz total!
While the FE-1 probe is waterproof the switch box is water resistant and must
not be submersed. (We use the same connectors as Fisher.)
Installation requires no tools or modifications to the detector. Switch box and
probe clips are attached by removable velcro lined clips.
The FE-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions!
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a 30" straight cable with strain relief
for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe
are never on at the same time.
FE-1 switch box is conveniently mounted on detector pole attachment in a
neutral position (for both right and left hand users) and to prevent toggle from
being accidentally switched or bumped by user or damaged by tree limbs,
brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the FE-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
of aftermarket accessories for Fisher metal detectors! The new Sun Ray
Invader FE-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Fisher ID Excel users. We have received many requests for
in-line target probes by Fisher brand users for some time due to the popularity
of our quality in-line probes for Minelab and White's metal detectors. Now
Fisher owners can enjoy the same benefits a quality Sun Ray in-line probe has
to offer! Here are some of the features of the FE-1:
Fully compatible with the Fisher ID Excel model only. The FE-1 is precision
built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending
on settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely
along arm rest for easy access. FE-1 probe and cable weigh approx. 6 oz. FE-1
switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. -
approx. 11 oz total!
While the FE-1 probe is waterproof the switch box is water resistant and must
not be submersed. (We use the same connectors as Fisher.)
Installation requires no tools or modifications to the detector. Switch box and
probe clips are attached by removable velcro lined clips.
The FE-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions!
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a 30" straight cable with strain relief
for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe
are never on at the same time.
FE-1 switch box is conveniently mounted on detector pole attachment in a
neutral position (for both right and left hand users) and to prevent toggle from
being accidentally switched or bumped by user or damaged by tree limbs,
brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the FE-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
GARRETT ACCESSORIES
SUN RAY INVADER™ GI-1 TARGET PROBE
(Compatible with Garrett GTI model detectors)
(Compatible with Garrett GTI model detectors)
Sun Ray Detector Electronics is proud to announce their new Invader™ series
of after market accessories for Garrett metal detectors! The new Sun Ray
Invader GI-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Garrett GTI users. We have received many requests for in-
line target probes by Garrett brand users for some time due to the popularity of
our quality in-line probes for Minelab, White's and Fisher metal detectors. Now
Garrett owners can enjoy the same benefits a quality Sun Ray in-line probe has
to offer! Here are some of the features of the GI-1:
Fully compatible with all Garrett GTI models (including the 1500, 2000, 2500)!
The GI-1 is precision built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending
on detector used, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of
upper shaft for easy access. GI-1 probe and cable weigh approx. 6 oz. GI-1
switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. -
approx. 11 oz total!
While the GI-1 probe is waterproof the switch box is water resistant and must
not be submersed. (We use the same connectors as Garrett.)
Installation requires no tools or modifications to the detector.
The GI-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions! (The GI-1
probe is non-imaging and depth reading will be off due to the probe's diameter,
which is normal.)
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a very flexible heavy duty custom
30" straight cable with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe
are never on at the same time.
GI-1 switch box is conveniently mounted on detector pole attachment in a
neutral position (for both right and left hand users) and to prevent toggle from
being accidentally switched or bumped by user or damaged by tree limbs,
brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the GI-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
of after market accessories for Garrett metal detectors! The new Sun Ray
Invader GI-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Garrett GTI users. We have received many requests for in-
line target probes by Garrett brand users for some time due to the popularity of
our quality in-line probes for Minelab, White's and Fisher metal detectors. Now
Garrett owners can enjoy the same benefits a quality Sun Ray in-line probe has
to offer! Here are some of the features of the GI-1:
Fully compatible with all Garrett GTI models (including the 1500, 2000, 2500)!
The GI-1 is precision built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending
on detector used, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of
upper shaft for easy access. GI-1 probe and cable weigh approx. 6 oz. GI-1
switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. -
approx. 11 oz total!
While the GI-1 probe is waterproof the switch box is water resistant and must
not be submersed. (We use the same connectors as Garrett.)
Installation requires no tools or modifications to the detector.
The GI-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions! (The GI-1
probe is non-imaging and depth reading will be off due to the probe's diameter,
which is normal.)
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a very flexible heavy duty custom
30" straight cable with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe
are never on at the same time.
GI-1 switch box is conveniently mounted on detector pole attachment in a
neutral position (for both right and left hand users) and to prevent toggle from
being accidentally switched or bumped by user or damaged by tree limbs,
brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the GI-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
SUN RAY INVADER™ YF-1 TARGET PROBE
(Compatible with Garrett ACE, GTP & most GTAX series metal detectors)
(Compatible with Garrett ACE, GTP & most GTAX series metal detectors)
Sun Ray Detector Electronics is proud to announce our new Invader™ series
of aftermarket accessories for Garrett metal detectors! The new Sun Ray
Invader YF-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Garrett ACE, GTP & selected GTAX series users. We have
received many requests for in-line target probes by Garrett brand users for
some time due to the popularity of our quality in-line probes for Minelab,
White's and Fisher metal detectors. Now Garrett owners can enjoy the same
benefits a quality Sun Ray in-line probe has to offer! Here are some of the
features of the YF-1:
Fully compatible with the Garrett ACE 150 & 250 models and with the flip of a
switch is compatible with the GTP 1350 and GTAX 550, 750 & 1250. (NOTE:
Early GTAX models including the GTAX 350, 400, 500 & 1000 are not
compatible due to a different "center pin" connector used. The YF-1 is
precision built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep
depending on detector used, settings, ground and moisture conditions!
New compact, Light weight, waterproof/submersible 6" X 1" diameter probe
mounts on top of upper shaft or along arm rest rod depending on model) for
easy access. YF-1 probe and cable weigh approx. 5 oz. YF-1 switch box,
connectors, cable and two probe clips, etc. weigh approx. 5oz. - 10 oz total!
While the YF-1 probe is waterproof, the switch box is water resistant and
must not be submersed. (We use the same connectors as Garrett.)
Installation requires no tools or modifications to the detector.
The YF-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions (depending
on model)! (On the GTP the YF-1 profiling function accuracy may be off and
depth reading will be off due to the probe's diameter, which is normal.)
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a very flexible heavy duty custom
30" straight cable with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
"Mode" switch (see lower left photo) shuts off coil as it turns on probe and
vise versa. Coil and probe are never on at the same time.
New "Detector Selection Switch" (see lower right photo) allows you to switch
between ACE series models and GTP/GTAX series models for proper Target
ID and operation!
YF-1 switch box is conveniently mounted on detector pole attachment in a
neutral position (for both right and left hand users) and to prevent toggles
from being accidentally switched or bumped by user or damaged by tree
limbs, brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the YF-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
of aftermarket accessories for Garrett metal detectors! The new Sun Ray
Invader YF-1 Target Probe has been developed to satisfy the pinpointing and
retrieval needs of Garrett ACE, GTP & selected GTAX series users. We have
received many requests for in-line target probes by Garrett brand users for
some time due to the popularity of our quality in-line probes for Minelab,
White's and Fisher metal detectors. Now Garrett owners can enjoy the same
benefits a quality Sun Ray in-line probe has to offer! Here are some of the
features of the YF-1:
Fully compatible with the Garrett ACE 150 & 250 models and with the flip of a
switch is compatible with the GTP 1350 and GTAX 550, 750 & 1250. (NOTE:
Early GTAX models including the GTAX 350, 400, 500 & 1000 are not
compatible due to a different "center pin" connector used. The YF-1 is
precision built to ensure peak performance.
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep
depending on detector used, settings, ground and moisture conditions!
New compact, Light weight, waterproof/submersible 6" X 1" diameter probe
mounts on top of upper shaft or along arm rest rod depending on model) for
easy access. YF-1 probe and cable weigh approx. 5 oz. YF-1 switch box,
connectors, cable and two probe clips, etc. weigh approx. 5oz. - 10 oz total!
While the YF-1 probe is waterproof, the switch box is water resistant and
must not be submersed. (We use the same connectors as Garrett.)
Installation requires no tools or modifications to the detector.
The YF-1 incorporates all of the same functions as the stock coil including
visual and audible target ID along with identical pinpoint functions (depending
on model)! (On the GTP the YF-1 profiling function accuracy may be off and
depth reading will be off due to the probe's diameter, which is normal.)
High quality custom made, durable probe and connector cable used for
precision performance. Probe incorporates a very flexible heavy duty custom
30" straight cable with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum
100,000 mechanical life operation-as described in manufacturer's specs)
"Mode" switch (see lower left photo) shuts off coil as it turns on probe and
vise versa. Coil and probe are never on at the same time.
New "Detector Selection Switch" (see lower right photo) allows you to switch
between ACE series models and GTP/GTAX series models for proper Target
ID and operation!
YF-1 switch box is conveniently mounted on detector pole attachment in a
neutral position (for both right and left hand users) and to prevent toggles
from being accidentally switched or bumped by user or damaged by tree
limbs, brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are
heard clearly through your detector headphones!
No extra batteries required as the YF-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how
you ever got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
MINELAB
Explorer S, XS, II, SE & Quattro
SUN RAY STEALTH X-5
(for the Minelab Explorer S, XS, II, SE & Quattro)
(for the Minelab Explorer S, XS, II, SE & Quattro)
Maximum target separation in extreme high trash conditions!
5.5" Double-D coil!
Excellent depth capabilities!
Waterproof/submersible!
Coil cover included!
Weighs only 10 oz!
FULL 12 MONTH WARRANTY!
(Shipping Wt 1 lb 8 oz)
Field test reports indicate X-5's ability to find desirable targets missed by other coils
in high ferrous as well as non-ferrous trash conditions!
Only $189.95 + S&H
5.5" Double-D coil!
Excellent depth capabilities!
Waterproof/submersible!
Coil cover included!
Weighs only 10 oz!
FULL 12 MONTH WARRANTY!
(Shipping Wt 1 lb 8 oz)
Field test reports indicate X-5's ability to find desirable targets missed by other coils
in high ferrous as well as non-ferrous trash conditions!
Only $189.95 + S&H
SUN RAY STEALTH X-8
(for the Minelab Explorer S, XS, II, SE & Quattro)
(for the Minelab Explorer S, XS, II, SE & Quattro)
Full 8" Double-D coil!
Waterproof/submersible!
Good ground coverage!
Great Depth!
Ultra stable operation!
Ultra light weight - less than 16 oz!
Superior target separation over stock 10.5" coil!
Coil cover included!
FULL 12 MONTH WARRANTY!
(Shipping Wt 1 lb 8 oz)
Only $199.95 + S&H
Waterproof/submersible!
Good ground coverage!
Great Depth!
Ultra stable operation!
Ultra light weight - less than 16 oz!
Superior target separation over stock 10.5" coil!
Coil cover included!
FULL 12 MONTH WARRANTY!
(Shipping Wt 1 lb 8 oz)
Only $199.95 + S&H
SUN RAY STEALTH X-12
(for the Minelab Explorer S, XS, II, SE & Quattro)
(for the Minelab Explorer S, XS, II, SE & Quattro)
By popular demand Sunray has produced this ultra light weight coil for those wanting a
large coil with great depth but without the extra weight!
Full 12.5" Double-D coil!
Great ground coverage!
Great Depth!
Ultra light weight - only 20 1/2 oz - less than stock 10.5" coil!
Waterproof/submersible!
Includes open fitted coil cover.
FULL 12 MONTH WARRANTY!!
(Shipping Wt 3 lb)
Order Yours Today!!!
Only $219.95 + S&H
large coil with great depth but without the extra weight!
Full 12.5" Double-D coil!
Great ground coverage!
Great Depth!
Ultra light weight - only 20 1/2 oz - less than stock 10.5" coil!
Waterproof/submersible!
Includes open fitted coil cover.
FULL 12 MONTH WARRANTY!!
(Shipping Wt 3 lb)
Order Yours Today!!!
Only $219.95 + S&H
Coil Accessories
Sun Ray Explorer S, XS, II & Quattro 10.5" Coil Support Bracket Kit
Eliminates coil "creeping" when digging targets.
Ten possible coil positions.
Allows coil to be tipped up when hunting hills, banks, walls, etc.
Made of sturdy ABS plastic.
Reduces stress on coil bolt.
(NOTE: Please state whether kit is for the Explorer S/XS or the new Explorer
II/Quattro when ordering.)
(Note: Not compatible with the new 10" Explorer SE coil)
(Shipping Wt 1 oz)
Only $9.95 + S&H
Ten possible coil positions.
Allows coil to be tipped up when hunting hills, banks, walls, etc.
Made of sturdy ABS plastic.
Reduces stress on coil bolt.
(NOTE: Please state whether kit is for the Explorer S/XS or the new Explorer
II/Quattro when ordering.)
(Note: Not compatible with the new 10" Explorer SE coil)
(Shipping Wt 1 oz)
Only $9.95 + S&H
SUN RAY COIL PLUGS
For the Minelab Explorer S, XS, II & Quattro 10.5"
For the Minelab Explorer S, XS, II & Quattro 10.5"
Turns your open coil into a solid coil for hunting dry beach sand, long grass, corn and
bean stubble fields, etc. No more annoying sticks, long grass and beach sand sticking
through the openings and causing drag while sweeping the coil!
Reduces or eliminates falsing from above obstructions!
Extremely light weight. Only 1 oz ea. (Two plugs per set)
Simply pop them in place and your ready for any land hunting situation! Sun Ray Coil
Plugs easily pop out when not needed!
Designed by Rick Kelley
(Shipping Wt 3 oz)
Order Yours Today!!
MINELAB EXPLORER/QUATTRO 10.5" COIL PLUGS
(NOTE: Not compatible with the 10" Explorer SE coil)
Only $18.95 + S&H
(NOTE: COIL PLUGS FOR SUN RAY STEALTH X-8 & S-8 ARE NO LONGER
AVAILABLE)
bean stubble fields, etc. No more annoying sticks, long grass and beach sand sticking
through the openings and causing drag while sweeping the coil!
Reduces or eliminates falsing from above obstructions!
Extremely light weight. Only 1 oz ea. (Two plugs per set)
Simply pop them in place and your ready for any land hunting situation! Sun Ray Coil
Plugs easily pop out when not needed!
Designed by Rick Kelley
(Shipping Wt 3 oz)
Order Yours Today!!
MINELAB EXPLORER/QUATTRO 10.5" COIL PLUGS
(NOTE: Not compatible with the 10" Explorer SE coil)
Only $18.95 + S&H
(NOTE: COIL PLUGS FOR SUN RAY STEALTH X-8 & S-8 ARE NO LONGER
AVAILABLE)
In-Line Target Probe
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on
settings, ground and moisture conditions!
Light weight, waterproof/submersible 1" X 9" probe. Comes with a very flexible heavy
duty custom 30" straight cable with strain relief for "tangle free" operation, and mounts
nicely along the Explorer's battery compartment or on top of upper shaft.
Very compact, ultra light switch box mounted on bottom of upper shaft makes for easy
switching from coil to probe. Makes coil changes super fast as coil cable will no longer
be inserted into upper shaft! While the X-1 probe is waterproof the switch box is water
resistant and must not be submersed.
X-1 gives operator ALL of the same functions as stock coil including accurate visual
and audible target ID in both Smartfind & Digital mode, non-motion pinpoint, etc.
Accurate approximate depth indications from tip of probe to target can be achieved
through visual observation of the Explorer's depth gauge (although the scale will be
different). Scale is explained in X-1 instructions. Accuracy on coin size targets only.
Quality high performance toggle switch used for peak performance! (Minimum 100,000
mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are
never on at the same time.
No external buzzers or lights are needed as all targets are heard clearly through your
detector headphones!
No extra batteries required as the X-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how you ever
got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
(Note: Above price does not include the upper shaft. If you are not sending in your
upper shaft for modification add $34.95 for a new upper shaft with pre-mounted probe.)
New upper shaft with pre-mounted probe-Only $214.90 + S&H
We now have a good supply of Explorer II, Quattro and the new SE upper shafts in
stock! Minelab no longer manufactures the XS upper shaft and our sunray's is
exhausted. If you need an X-1 for your Explorer S or XS you will either have to send us
your upper shaft for modification or have your Relic Hunter Supply send it in for you.
NOTE: Your Explorer II or Quattro upper shaft must be sent to Sun Ray for the X-1
Probe installation or a new one may be purchased from your dealer or direct from Sun
Ray. Contact your local Relic Hunter Supply or Sun Ray Detector Electronics direct for
full details. When ordering X-1 be sure to state which arm you swing with (right or left)
for proper probe switch installation.
(WARNING: The Explorer XS & S upper shaft is not recommended for use with the new
Explorer II/Quattro control housing and may damage the locking system.) NOTE: We
except no responsibility for any damage caused to the Explorer II/Quattro control
housing if you choose to use the XS & S upper shaft for your X-1 Probe installation on
the new Explorer II/Quattro.)
Sun Ray Detector Electronics has been manufacturing multi-frequency in-line probes
since 1997. Our design and production engineer has been designing and building
probes for over 11 years which include in-line multi-frequency, stand alone as well as
pulse and has designed and built pulse detectors and circuits. The popularity of our
in-line probes is well known in the metal detecting industry and satisfied customers tell
us our quality is second to none!
settings, ground and moisture conditions!
Light weight, waterproof/submersible 1" X 9" probe. Comes with a very flexible heavy
duty custom 30" straight cable with strain relief for "tangle free" operation, and mounts
nicely along the Explorer's battery compartment or on top of upper shaft.
Very compact, ultra light switch box mounted on bottom of upper shaft makes for easy
switching from coil to probe. Makes coil changes super fast as coil cable will no longer
be inserted into upper shaft! While the X-1 probe is waterproof the switch box is water
resistant and must not be submersed.
X-1 gives operator ALL of the same functions as stock coil including accurate visual
and audible target ID in both Smartfind & Digital mode, non-motion pinpoint, etc.
Accurate approximate depth indications from tip of probe to target can be achieved
through visual observation of the Explorer's depth gauge (although the scale will be
different). Scale is explained in X-1 instructions. Accuracy on coin size targets only.
Quality high performance toggle switch used for peak performance! (Minimum 100,000
mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are
never on at the same time.
No external buzzers or lights are needed as all targets are heard clearly through your
detector headphones!
No extra batteries required as the X-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how you ever
got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
(Note: Above price does not include the upper shaft. If you are not sending in your
upper shaft for modification add $34.95 for a new upper shaft with pre-mounted probe.)
New upper shaft with pre-mounted probe-Only $214.90 + S&H
We now have a good supply of Explorer II, Quattro and the new SE upper shafts in
stock! Minelab no longer manufactures the XS upper shaft and our sunray's is
exhausted. If you need an X-1 for your Explorer S or XS you will either have to send us
your upper shaft for modification or have your Relic Hunter Supply send it in for you.
NOTE: Your Explorer II or Quattro upper shaft must be sent to Sun Ray for the X-1
Probe installation or a new one may be purchased from your dealer or direct from Sun
Ray. Contact your local Relic Hunter Supply or Sun Ray Detector Electronics direct for
full details. When ordering X-1 be sure to state which arm you swing with (right or left)
for proper probe switch installation.
(WARNING: The Explorer XS & S upper shaft is not recommended for use with the new
Explorer II/Quattro control housing and may damage the locking system.) NOTE: We
except no responsibility for any damage caused to the Explorer II/Quattro control
housing if you choose to use the XS & S upper shaft for your X-1 Probe installation on
the new Explorer II/Quattro.)
Sun Ray Detector Electronics has been manufacturing multi-frequency in-line probes
since 1997. Our design and production engineer has been designing and building
probes for over 11 years which include in-line multi-frequency, stand alone as well as
pulse and has designed and built pulse detectors and circuits. The popularity of our
in-line probes is well known in the metal detecting industry and satisfied customers tell
us our quality is second to none!
Other Explorer/Quattro Accessories
SUN RAY EXPLORER RAIN JACKET
Protect your Explorer XS, S, II & SE with our new Sun Ray Explorer Rain Jacket. Keeps
rain, dust, mud, etc. from damaging the LCD display and internal parts of the control
housing! Eliminates LCD display scratches! Made from UV stabilized urethane coated
nylon. Full view plastic face allows access to all controls and allows easy viewing of
LCD display. Fits snugly over control housing and is secured by two sturdy velcroed
web straps. The Sun Ray Explorer Rain Jacket is available in five attractive colors - Fall
Camo, Dark Brown, Navy Blue, Silver Gray and now also in Black. Order yours today!!!
(Shipping wt 1 oz)
Only $12.95 ea. + S&H
Please specify color when ordering! Thanks!!
rain, dust, mud, etc. from damaging the LCD display and internal parts of the control
housing! Eliminates LCD display scratches! Made from UV stabilized urethane coated
nylon. Full view plastic face allows access to all controls and allows easy viewing of
LCD display. Fits snugly over control housing and is secured by two sturdy velcroed
web straps. The Sun Ray Explorer Rain Jacket is available in five attractive colors - Fall
Camo, Dark Brown, Navy Blue, Silver Gray and now also in Black. Order yours today!!!
(Shipping wt 1 oz)
Only $12.95 ea. + S&H
Please specify color when ordering! Thanks!!
Mastering the MINELAB QUATTRO
by Andy Sabisch
by Andy Sabisch
Full-Band Spectrum technology explained - the secret behind the Quattro MP.
Features and specs of the Quattro.
Air testing & test gardens.
The Quattro's controls explained.
Tips & techniques!
Chapters on coin, relic, beach and competition hunting with the Quattro!
If you didn't know about the Quattro before you will after reading this book!
Order your copy now!
Only $14.95 + $1 S&H
Features and specs of the Quattro.
Air testing & test gardens.
The Quattro's controls explained.
Tips & techniques!
Chapters on coin, relic, beach and competition hunting with the Quattro!
If you didn't know about the Quattro before you will after reading this book!
Order your copy now!
Only $14.95 + $1 S&H
Sovereign/Elite
Double-D Coils
SUN RAY INTRUDER S-5
For the Minelab Sovereign (all versions) including the Elite & GT
For the Minelab Sovereign (all versions) including the Elite & GT
Maximum target separation in extreme high trash conditions!
5.5" Double-D coil!
Excellent depth capabilities!
Waterproof/submersible!
Coil cover included!
Weighs only 12 oz!
FULL 12 MONTH WARRANTY!
(Shipping Wt 1 lb 8 oz)
Field test reports indicate S-5's ability to find desirable targets missed by other coils in
high ferrous as well as non-ferrous trash conditions!
Only $189.95 + S&H
5.5" Double-D coil!
Excellent depth capabilities!
Waterproof/submersible!
Coil cover included!
Weighs only 12 oz!
FULL 12 MONTH WARRANTY!
(Shipping Wt 1 lb 8 oz)
Field test reports indicate S-5's ability to find desirable targets missed by other coils in
high ferrous as well as non-ferrous trash conditions!
Only $189.95 + S&H
SUN RAY INTRUDER S-8
For the Minelab Sovereign (all versions) including the Elite & GT
For the Minelab Sovereign (all versions) including the Elite & GT
Waterproof/submersible!
Good ground coverage!
Great Depth!
Full 8" Double-D coil!
Ultra stable operation!
Ultra light weight - only 18 1/2 to 19 oz - lighter than BBS 800 and older Coinsearch coil!
Superior target separation over BBS 1000 coil
Coil cover included!
FULL 12 MONTH WARRANTY!
(Shipping Wt 1 lb 8 oz)
Only $199.95 + S&H
Good ground coverage!
Great Depth!
Full 8" Double-D coil!
Ultra stable operation!
Ultra light weight - only 18 1/2 to 19 oz - lighter than BBS 800 and older Coinsearch coil!
Superior target separation over BBS 1000 coil
Coil cover included!
FULL 12 MONTH WARRANTY!
(Shipping Wt 1 lb 8 oz)
Only $199.95 + S&H
SUN RAY INTRUDER S-12
For the Minelab Sovereign (all versions) including the Elite & GT
For the Minelab Sovereign (all versions) including the Elite & GT
By popular demand we have produced this ultra light weight coil for those wanting a
large coil with great depth but without the extra weight!
Full 12.5" Double-D coil!
Great ground coverage!
Great Depth!
Ultra light weight - only 23 1/2 oz - less than stock 10" coil!
Waterproof/submersible!
Includes open fitted coil cover.
FULL 12 MONTH WARRANTY!!
(Shipping Wt 3 lb)
Order Yours Today!!!
Only $219.95 + S&H
large coil with great depth but without the extra weight!
Full 12.5" Double-D coil!
Great ground coverage!
Great Depth!
Ultra light weight - only 23 1/2 oz - less than stock 10" coil!
Waterproof/submersible!
Includes open fitted coil cover.
FULL 12 MONTH WARRANTY!!
(Shipping Wt 3 lb)
Order Yours Today!!!
Only $219.95 + S&H
Coil Accessories
SUN RAY COIL PLUGS
For the Minelab Explorer S, XS, II & Quattro 10.5"
For the Minelab Explorer S, XS, II & Quattro 10.5"
Turns your open coil into a solid coil for hunting dry beach sand, long grass, corn and
bean stubble fields, etc. No more annoying sticks, long grass and beach sand sticking
through the openings and causing drag while sweeping the coil!
Reduces or eliminates falsing from above obstructions!
Extremely light weight. Only 1 oz ea. (Two plugs per set)
Simply pop them in place and your ready for any land hunting situation! Sun Ray Coil
Plugs easily pop out when not needed!
Designed by Rick Kelley
(Shipping Wt 3 oz)
Order Yours Today!!
MINELAB EXPLORER/QUATTRO 10.5" COIL PLUGS
(NOTE: Not compatible with the 10" Explorer SE coil)
Only $18.95 + S&H
(NOTE: COIL PLUGS FOR SUN RAY STEALTH X-8 & S-8 ARE NO LONGER AVAILABLE)
bean stubble fields, etc. No more annoying sticks, long grass and beach sand sticking
through the openings and causing drag while sweeping the coil!
Reduces or eliminates falsing from above obstructions!
Extremely light weight. Only 1 oz ea. (Two plugs per set)
Simply pop them in place and your ready for any land hunting situation! Sun Ray Coil
Plugs easily pop out when not needed!
Designed by Rick Kelley
(Shipping Wt 3 oz)
Order Yours Today!!
MINELAB EXPLORER/QUATTRO 10.5" COIL PLUGS
(NOTE: Not compatible with the 10" Explorer SE coil)
Only $18.95 + S&H
(NOTE: COIL PLUGS FOR SUN RAY STEALTH X-8 & S-8 ARE NO LONGER AVAILABLE)
In-Line Target Probes
SUN RAY S-1 SUPER TARGET PROBE
Accurate "Bulls eye" pinpointing on coin size targets up to 3" deep in all metal mode! 1
1/2" - 2" accurate tone ID in discriminate mode! (NOTE: Greater depth on larger than coin
size targets)
Accurate visual ID when used with Sun Ray or Minelab digital meter!
Uses the Sovereign's BBS circuitry to cancel ground effects and reject most hot rocks!
No buzzers or lights necessary. All target responses come directly through your
headphones! Makes hand held probes obsolete!
No extra batteries required!
S-1 probe is 1" X 9" long, comes with a very flexible heavy duty custom 30" straight cable
for "tangle free" operation and is submersible.
Probe is detachable from S-1 switch box for direct insertion to Sovereign control housing
for stand alone detecting/pinpointing!
Includes 2 S-1 Probe Clips for attaching S-1 probe along side arm rest or upper shaft
when not in use!
Ultra Light Weight! The "New" S-1 has a smaller, more compact switch box and weighs 2
1/2 oz less than original S-1. Probe w/cable=7 oz / S-1 switch box=5 oz / overall weight
including 2 probe clips=13 oz!
S-1 switch box comes with a short standard length cable and connects directly into your
Minelab or Sun Ray meter - Standard Model.
Optional 13" Extended Cable Model available if mounting your Elite or GT control housing
under the arm rest w/o a meter.
Optional 50" switch box extension cable available if hip/chest mounting Elite control
housing w/o a meter.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt - 1 lb 8 oz)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how you ever got
along without it!!
Order Yours Today!!!
Only $179.95 + S&H (Standard Model)
Only $184.95 (with 13" Cable Extension)
50" Extension Cable - $29.95 (for hipmounting Control Housing w/o meter)
Sun Ray Detector Electronics has been manufacturing multi-frequency in-line probes since
1997. Our design and production engineer has been designing and building probes for
over 11 years which include in-line multi-frequency, stand alone as well as pulse and has
designed and built pulse detectors and circuits. The popularity of our in-line probes is well
known in the metal detecting industry and satisfied customers tell us our quality is second
to none!
1/2" - 2" accurate tone ID in discriminate mode! (NOTE: Greater depth on larger than coin
size targets)
Accurate visual ID when used with Sun Ray or Minelab digital meter!
Uses the Sovereign's BBS circuitry to cancel ground effects and reject most hot rocks!
No buzzers or lights necessary. All target responses come directly through your
headphones! Makes hand held probes obsolete!
No extra batteries required!
S-1 probe is 1" X 9" long, comes with a very flexible heavy duty custom 30" straight cable
for "tangle free" operation and is submersible.
Probe is detachable from S-1 switch box for direct insertion to Sovereign control housing
for stand alone detecting/pinpointing!
Includes 2 S-1 Probe Clips for attaching S-1 probe along side arm rest or upper shaft
when not in use!
Ultra Light Weight! The "New" S-1 has a smaller, more compact switch box and weighs 2
1/2 oz less than original S-1. Probe w/cable=7 oz / S-1 switch box=5 oz / overall weight
including 2 probe clips=13 oz!
S-1 switch box comes with a short standard length cable and connects directly into your
Minelab or Sun Ray meter - Standard Model.
Optional 13" Extended Cable Model available if mounting your Elite or GT control housing
under the arm rest w/o a meter.
Optional 50" switch box extension cable available if hip/chest mounting Elite control
housing w/o a meter.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt - 1 lb 8 oz)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how you ever got
along without it!!
Order Yours Today!!!
Only $179.95 + S&H (Standard Model)
Only $184.95 (with 13" Cable Extension)
50" Extension Cable - $29.95 (for hipmounting Control Housing w/o meter)
Sun Ray Detector Electronics has been manufacturing multi-frequency in-line probes since
1997. Our design and production engineer has been designing and building probes for
over 11 years which include in-line multi-frequency, stand alone as well as pulse and has
designed and built pulse detectors and circuits. The popularity of our in-line probes is well
known in the metal detecting industry and satisfied customers tell us our quality is second
to none!
SUN RAY S-1 SUPER TARGET PROBE
For the Minelab Sovereign Elite & new Sovereign GT
For the Minelab Sovereign Elite & new Sovereign GT
Accurate "Bulls eye" pinpointing on coin size targets up to 3" deep in all metal mode! 1
1/2" - 2" accurate tone ID in discriminate mode! (NOTE: Greater depth on larger than coin
size targets)
Accurate visual ID when used with Sun Ray or Minelab digital meter!
Uses the Elite's BBS circuitry to cancel ground effects and reject most hot rocks!
No buzzers or lights necessary. All target responses come directly through your
headphones! Makes hand held probes obsolete!
No extra batteries required!
S-1 probe is 1" X 9" long, comes with a very flexible heavy duty custom 30" straight cable
for "tangle free" operation and is submersible.
S-1 switch box slides onto the meter mounting bracket and the meter slides onto the top
of the S-1 switch box allowing you to see the Minelab meter display easier and allows
switching from coil to probe and back with the flip of your thumb!
Probe is detachable from S-1 switch box for direct insertion to Elite control housing for
stand alone detecting/pinpointing!
Includes S-1 Probe Clip Attachment for attaching S-1 probe along side arm rest when not
in use!
Ultra Light Weight! The "New" S-1 has a smaller, more compact switch box and weighs 2
1/2 oz less than original S-1. Probe w/cable=7 oz / S-1 switch box=5 oz / overall weight
including 2 probe clips=13 oz!
S-1 switch box comes with a short standard length cable and connects directly into your
Minelab or Sun Ray meter - Standard Model.
Optional 13" extended cable model available if mounting your Elite or GT control housing
under the arm rest w/o a meter.
Optional 50" switch box extension cable available if hip/chest mounting Elite control
housing w/o a meter.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt - 1 lb 8 oz)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how you ever got
along without it!!
Order Yours Today!!!
Only $179.95 + S&H (Standard Model)
Only $184.95 (with 13" Cable Extension)
50" Extension Cable - $29.95 (for hipmounting Control Housing w/o meter)
Sun Ray Detector Electronics has been manufacturing multi-frequency in-line probes since
1997. Our design and production engineer has been designing and building probes for
over 11 years which include in-line multi-frequency, stand alone as well as pulse and has
designed and built pulse detectors and circuits. The popularity of our in-line probes is well
known in the metal detecting industry and satisfied customers tell us our quality is second
to none!
1/2" - 2" accurate tone ID in discriminate mode! (NOTE: Greater depth on larger than coin
size targets)
Accurate visual ID when used with Sun Ray or Minelab digital meter!
Uses the Elite's BBS circuitry to cancel ground effects and reject most hot rocks!
No buzzers or lights necessary. All target responses come directly through your
headphones! Makes hand held probes obsolete!
No extra batteries required!
S-1 probe is 1" X 9" long, comes with a very flexible heavy duty custom 30" straight cable
for "tangle free" operation and is submersible.
S-1 switch box slides onto the meter mounting bracket and the meter slides onto the top
of the S-1 switch box allowing you to see the Minelab meter display easier and allows
switching from coil to probe and back with the flip of your thumb!
Probe is detachable from S-1 switch box for direct insertion to Elite control housing for
stand alone detecting/pinpointing!
Includes S-1 Probe Clip Attachment for attaching S-1 probe along side arm rest when not
in use!
Ultra Light Weight! The "New" S-1 has a smaller, more compact switch box and weighs 2
1/2 oz less than original S-1. Probe w/cable=7 oz / S-1 switch box=5 oz / overall weight
including 2 probe clips=13 oz!
S-1 switch box comes with a short standard length cable and connects directly into your
Minelab or Sun Ray meter - Standard Model.
Optional 13" extended cable model available if mounting your Elite or GT control housing
under the arm rest w/o a meter.
Optional 50" switch box extension cable available if hip/chest mounting Elite control
housing w/o a meter.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt - 1 lb 8 oz)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how you ever got
along without it!!
Order Yours Today!!!
Only $179.95 + S&H (Standard Model)
Only $184.95 (with 13" Cable Extension)
50" Extension Cable - $29.95 (for hipmounting Control Housing w/o meter)
Sun Ray Detector Electronics has been manufacturing multi-frequency in-line probes since
1997. Our design and production engineer has been designing and building probes for
over 11 years which include in-line multi-frequency, stand alone as well as pulse and has
designed and built pulse detectors and circuits. The popularity of our in-line probes is well
known in the metal detecting industry and satisfied customers tell us our quality is second
to none!
Other Sovereign Accessories
Sun Ray Charger Accessories
IMPORTANT NOTICE:
Q-12 & SR-12 Optional Adaptors: While the Sun Ray SR-12 and Q-12 chargers are no
longer available we still stock the following adaptors: White's 9.6v Recharge pak adaptor
(XLT/DFX/MXT, etc.) - Minelab Sovereign Elite NIMH Pak Battery Station.
Optional Adaptors
White's 9.6v Recharge Pak Adaptor (XLT/DFX/MXT)
(Shipping Wt 1 oz)
Only $3.00
Minelab Sovereign Elite NIMH Pak Battery Station
(Shipping Wt 6 oz)
Only $19.95
Q-12 & SR-12 Optional Adaptors: While the Sun Ray SR-12 and Q-12 chargers are no
longer available we still stock the following adaptors: White's 9.6v Recharge pak adaptor
(XLT/DFX/MXT, etc.) - Minelab Sovereign Elite NIMH Pak Battery Station.
Optional Adaptors
White's 9.6v Recharge Pak Adaptor (XLT/DFX/MXT)
(Shipping Wt 1 oz)
Only $3.00
Minelab Sovereign Elite NIMH Pak Battery Station
(Shipping Wt 6 oz)
Only $19.95
WHITE'S
In-Line Target Probes
SUN RAY INVADER™ DX-1 TARGET PROBE
(Compatible with White's DFX, MXT and now Matrix M-6)
(Compatible with White's DFX, MXT and now Matrix M-6)
Sun Ray Detector Electronics is proud to announce our new Invader™ series of
aftermarket accessories for White's metal detectors! The new Sun Ray Invader DX-1
Target Probe has been developed to satisfy the pinpointing and retrieval needs of
DFX/MXT users. We have received many requests for in-line target probes by White's
and other detector brand users for several years due to the popularity of our quality in-
line probes for the Minelab Explorer and Sovereign/Elite. Now White's owners can enjoy
the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the
features of the DX-1:
Fully compatible with both DFX and MXT models! The DX-1 is precision built to ensure
peak performance on either model!
Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on
detector used, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper
shaft (which has been very popular among Explorer users). DX-1 probe and cable
weigh approx. 6 oz. DX-1 switch box, connectors, cable and two probe clips, etc.
weigh approx. 5 oz. - approx. 11 oz total! (Optional box mount probe clip attachment
available for those wishing to mount probe along side of detector control housing).
While the DX-1 probe is waterproof the switch box is water resistant and must not be
submersed. (We use the same connectors as White's.)
DX-1 incorporates all of the same functions as the stock coil including accurate visual
and audible target ID along with identical pinpoint functions! (Depth reading will be off
due to the probe's diameter which is normal.)
High quality custom made, durable probe and connector cable used for precision
performance. Probe incorporates a very flexible heavy duty custom 30" straight cable
with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum 100,000
mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are
never on at the same time.
DX-1 switch box is conveniently mounted on detector pole attachment in a neutral
position (for both right and left hand users) and to prevent toggle from being
accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch
box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are heard
clearly through your detector headphones!
No extra batteries required as the DX-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how you ever
got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
Optional Box Mount Probe Clip Attachment - $19.95 + S&H
aftermarket accessories for White's metal detectors! The new Sun Ray Invader DX-1
Target Probe has been developed to satisfy the pinpointing and retrieval needs of
DFX/MXT users. We have received many requests for in-line target probes by White's
and other detector brand users for several years due to the popularity of our quality in-
line probes for the Minelab Explorer and Sovereign/Elite. Now White's owners can enjoy
the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the
features of the DX-1:
Fully compatible with both DFX and MXT models! The DX-1 is precision built to ensure
peak performance on either model!
Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on
detector used, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper
shaft (which has been very popular among Explorer users). DX-1 probe and cable
weigh approx. 6 oz. DX-1 switch box, connectors, cable and two probe clips, etc.
weigh approx. 5 oz. - approx. 11 oz total! (Optional box mount probe clip attachment
available for those wishing to mount probe along side of detector control housing).
While the DX-1 probe is waterproof the switch box is water resistant and must not be
submersed. (We use the same connectors as White's.)
DX-1 incorporates all of the same functions as the stock coil including accurate visual
and audible target ID along with identical pinpoint functions! (Depth reading will be off
due to the probe's diameter which is normal.)
High quality custom made, durable probe and connector cable used for precision
performance. Probe incorporates a very flexible heavy duty custom 30" straight cable
with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum 100,000
mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are
never on at the same time.
DX-1 switch box is conveniently mounted on detector pole attachment in a neutral
position (for both right and left hand users) and to prevent toggle from being
accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch
box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are heard
clearly through your detector headphones!
No extra batteries required as the DX-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how you ever
got along without it!!
Order Yours Today!!!
Only $179.95 + S&H
Optional Box Mount Probe Clip Attachment - $19.95 + S&H
SUN RAY INVADER™ XL-1 TARGET PROBE
(Compatible with White's XLT and other 6.592 khz models)
(Compatible with White's XLT and other 6.592 khz models)
Sun Ray Detector Electronics is proud to announce our new Invader™ series of
aftermarket accessories for White's metal detectors! The new Sun Ray Invader XL-1
Target Probe has been developed to satisfy the pinpointing and retrieval needs of XLT
and other users with models operating with 6.592 khz. We have received many requests
for in-line target probes by White's and other detector brand users for several years due
to the popularity of our quality in-line probes for the Minelab Explorer and Sovereign/Elite.
Now White's owners can enjoy the same benefits a quality Sun Ray in-line probe has to
offer! Here are some of the features of the XL-1:
Fully compatible with XLT and models using 6.592 khz including Eagle (series),
Spectrums, Pro XL, Quantum XT, 6000 Di Pro, 5900 Di Pro, IDX Pro, Classic ID, Classic I,
II & III S/L, etc. ! The XL-1 is precision built to ensure peak performance on those models!
Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on
detector used, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper
shaft (which has been very popular among Explorer users). XL-1 probe and cable weigh
approx. 6 oz. XL-1 switch box, connectors, cable and two probe clips, etc. weigh approx.
5 oz. - approx. 11 oz total! (Optional box mount probe clip attachment available for those
wishing to mount probe along side of detector control housing - presently available for
the slim-line control boxes like the XLT, IDX Pro, etc).
While the XL-1 probe is waterproof the switch box is water resistant and must not be
submersed. (We use the same connectors as White's.)
XL-1 incorporates all of the same functions as the stock coil including accurate visual and
audible target ID (if the detector model provides those functions) along with identical
pinpoint functions! (Depth reading will be off due to the probe's diameter which is normal.)
High quality custom made, durable probe and connector cable used for precision
performance. Probe incorporates a very flexible heavy duty custom 30" straight cable
with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum 100,000
mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never
on at the same time.
XL-1 switch box is conveniently mounted on detector pole attachment in a neutral
position (for both right and left hand users) and to prevent toggle from being accidentally
switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is
brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are heard
clearly through your detector headphones!
No extra batteries required as the XL-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how you ever got
along without it!!
Order Yours Today!!!
Only $179.95 + S&H
Optional Box Mount Probe Clip Attachment - $19.95 + S&H
Sun Ray Detector Electronics has been manufacturing multi-frequency in-line probes
since 1997. Our design and production engineer has been designing and building probes
for over 11 years which include in-line multi-frequency, stand alone as well as pulse and
has designed and built pulse detectors and circuits. The popularity of our in-line probes is
well known in the metal detecting industry and satisfied customers tell us our quality is
second to none!
Above is a photo of the Sun Ray Invader XL-1 Target Probe mounted on a White's Eagle
Spectrum. Submitted by Mike Hibbs of Madisonville, KY.
aftermarket accessories for White's metal detectors! The new Sun Ray Invader XL-1
Target Probe has been developed to satisfy the pinpointing and retrieval needs of XLT
and other users with models operating with 6.592 khz. We have received many requests
for in-line target probes by White's and other detector brand users for several years due
to the popularity of our quality in-line probes for the Minelab Explorer and Sovereign/Elite.
Now White's owners can enjoy the same benefits a quality Sun Ray in-line probe has to
offer! Here are some of the features of the XL-1:
Fully compatible with XLT and models using 6.592 khz including Eagle (series),
Spectrums, Pro XL, Quantum XT, 6000 Di Pro, 5900 Di Pro, IDX Pro, Classic ID, Classic I,
II & III S/L, etc. ! The XL-1 is precision built to ensure peak performance on those models!
Accurate "bulls eye" pinpointing on coin size targets up to 3"+ deep depending on
detector used, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper
shaft (which has been very popular among Explorer users). XL-1 probe and cable weigh
approx. 6 oz. XL-1 switch box, connectors, cable and two probe clips, etc. weigh approx.
5 oz. - approx. 11 oz total! (Optional box mount probe clip attachment available for those
wishing to mount probe along side of detector control housing - presently available for
the slim-line control boxes like the XLT, IDX Pro, etc).
While the XL-1 probe is waterproof the switch box is water resistant and must not be
submersed. (We use the same connectors as White's.)
XL-1 incorporates all of the same functions as the stock coil including accurate visual and
audible target ID (if the detector model provides those functions) along with identical
pinpoint functions! (Depth reading will be off due to the probe's diameter which is normal.)
High quality custom made, durable probe and connector cable used for precision
performance. Probe incorporates a very flexible heavy duty custom 30" straight cable
with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak performance! (Minimum 100,000
mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never
on at the same time.
XL-1 switch box is conveniently mounted on detector pole attachment in a neutral
position (for both right and left hand users) and to prevent toggle from being accidentally
switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is
brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are heard
clearly through your detector headphones!
No extra batteries required as the XL-1 utilizes the detectors power source.
Complete installation & operation instructions included.
FULL 12 MONTH WARRANTY!!
(Shipping Wt. 2 lb)
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and you'll wonder how you ever got
along without it!!
Order Yours Today!!!
Only $179.95 + S&H
Optional Box Mount Probe Clip Attachment - $19.95 + S&H
Sun Ray Detector Electronics has been manufacturing multi-frequency in-line probes
since 1997. Our design and production engineer has been designing and building probes
for over 11 years which include in-line multi-frequency, stand alone as well as pulse and
has designed and built pulse detectors and circuits. The popularity of our in-line probes is
well known in the metal detecting industry and satisfied customers tell us our quality is
second to none!
Above is a photo of the Sun Ray Invader XL-1 Target Probe mounted on a White's Eagle
Spectrum. Submitted by Mike Hibbs of Madisonville, KY.
Headphones
SUN RAY PRO "GOLD" HEADPHONES
Sun Ray Detector Electronics is proud to introduce our new Sun Ray Pro "Gold"
Headphones. We decided to offer a high quality set of professional headphones without
the highest price! Plus we have now added even more new features making these the
premier metal detector headphones on the market today!! The Sun Ray Pro "Gold" version
are manufactured according to the following specifications:
High output 150 ohm (nominal impedance) speaker elements which are certified as hearing
aid compatible and are sensitive enough to pick up even the faintest of signals. Aluminum
case construction with polymer cones for moisture and sweat protection.
Dual multi position "segmented or detent" volume controls with NEW BLACK & YELLOW
KNOBS for that "Sun Ray" look!.
"New" Enhanced Limiter Circuit with on/off switch. (For more pronounced reduction in
loud blasts from surface targets, while allowing the faintest of signal responses to be
clearly heard. Limiter results will vary from one detector model to another.)
Mode selector switch makes the new Sun Ray Pros compatible with most metal detectors.
NEW TOGGLE SWITCH BOOTS keep moisture and dirt out of toggle switches!
"New" comfortable, lightweight dual swivel point ear cups with all "new" soft leather
muffs.
The new foam padded soft leather muffs are not only more comfortable than the earlier
vinyl muffs, they do not develop a "memory". They conform to the shape of your head
around your ears when worn and when taken off return to their original shape! Vinyl which
normally has a life expectancy of (3) three years can get harder with time and the elements,
which can cause a less comfortable fit as well as a noticeable increase in ambient (outside)
noise. The former version of the Sun Ray Pros yield a 24 decibel reduction in ambient
noise blocking ability when new. The new Sun Ray Pro "Gold" version yields a 26 decibel
reduction in ambient noise blocking ability and continues to block that noise day in and day
out, year in and year out because they stay soft and comfortable!
"New" adjustable soft leather headband.
One of the industries most durable coiled cables with NEW EXTERNAL STRAIN RELIEF
and 1/4" right angle, molded GOLD PLATED PLUG!
The new Sun Ray Pros will deliver a crisp audio response with volume to spare!
Same Limited Lifetime Warranty!
Order Yours Today!
Only $109.95 + S&H
(Compare the quality & performance of the new Sun Ray Pro "Gold" version to
headphones costing $120.00 - $150.00!)
Headphones. We decided to offer a high quality set of professional headphones without
the highest price! Plus we have now added even more new features making these the
premier metal detector headphones on the market today!! The Sun Ray Pro "Gold" version
are manufactured according to the following specifications:
High output 150 ohm (nominal impedance) speaker elements which are certified as hearing
aid compatible and are sensitive enough to pick up even the faintest of signals. Aluminum
case construction with polymer cones for moisture and sweat protection.
Dual multi position "segmented or detent" volume controls with NEW BLACK & YELLOW
KNOBS for that "Sun Ray" look!.
"New" Enhanced Limiter Circuit with on/off switch. (For more pronounced reduction in
loud blasts from surface targets, while allowing the faintest of signal responses to be
clearly heard. Limiter results will vary from one detector model to another.)
Mode selector switch makes the new Sun Ray Pros compatible with most metal detectors.
NEW TOGGLE SWITCH BOOTS keep moisture and dirt out of toggle switches!
"New" comfortable, lightweight dual swivel point ear cups with all "new" soft leather
muffs.
The new foam padded soft leather muffs are not only more comfortable than the earlier
vinyl muffs, they do not develop a "memory". They conform to the shape of your head
around your ears when worn and when taken off return to their original shape! Vinyl which
normally has a life expectancy of (3) three years can get harder with time and the elements,
which can cause a less comfortable fit as well as a noticeable increase in ambient (outside)
noise. The former version of the Sun Ray Pros yield a 24 decibel reduction in ambient
noise blocking ability when new. The new Sun Ray Pro "Gold" version yields a 26 decibel
reduction in ambient noise blocking ability and continues to block that noise day in and day
out, year in and year out because they stay soft and comfortable!
"New" adjustable soft leather headband.
One of the industries most durable coiled cables with NEW EXTERNAL STRAIN RELIEF
and 1/4" right angle, molded GOLD PLATED PLUG!
The new Sun Ray Pros will deliver a crisp audio response with volume to spare!
Same Limited Lifetime Warranty!
Order Yours Today!
Only $109.95 + S&H
(Compare the quality & performance of the new Sun Ray Pro "Gold" version to
headphones costing $120.00 - $150.00!)
OTHER (Non-Brand Specific) ACCESSORIES
ARM CUP "MUFF"
Introducing the Arm Cup Muff for your metal detector arm rest! Your forearm can get very
sore and irritated, especially in Summer when you sweat while detecting. The Arm Cup
Muff eliminates the abrasive effect of your arm moving around in the arm rest when dirt
and sand are present. Made from X-tra comfortable shearling for extreme comfort while
swinging your detector. They are cool in Summer and warm in Winter!
The Arm Cup Muff is available for the following detectors brands:
Minelab - Fisher - White's - Garrett
The Arm Cup Muff has a self adhesive backing and is easily installed on your arm rest by
simply peeling off the backing and pressing it into the arm rest cup. Complete installation
instructions are included.
When ordering please state detector & model.
Only $9.95 + S&H
sore and irritated, especially in Summer when you sweat while detecting. The Arm Cup
Muff eliminates the abrasive effect of your arm moving around in the arm rest when dirt
and sand are present. Made from X-tra comfortable shearling for extreme comfort while
swinging your detector. They are cool in Summer and warm in Winter!
The Arm Cup Muff is available for the following detectors brands:
Minelab - Fisher - White's - Garrett
The Arm Cup Muff has a self adhesive backing and is easily installed on your arm rest by
simply peeling off the backing and pressing it into the arm rest cup. Complete installation
instructions are included.
When ordering please state detector & model.
Only $9.95 + S&H
SUN RAY DELUXE TREASURE POUCH
Hand-made from top quality leather - double stitched and riveted for extra strength and
durability!
Treasure pouch has two velcroed pouches for treasure, extra batteries, etc., large pouch
for trash, sheath for digger or buck knife and two PVC holders for coin popper or
screwdriver and probe.
Accepts 2 1/4" belt (Not included).
Available in (L) left or (R) right hand side. Specify which side when ordering.
(Note: Color or shade of Pouch may be different from photo depending on leather supply.)
(Shipping Wt 1 lb 4 oz)
Only $39.95 + S & H Right Hand Side
Left Hand Side
durability!
Treasure pouch has two velcroed pouches for treasure, extra batteries, etc., large pouch
for trash, sheath for digger or buck knife and two PVC holders for coin popper or
screwdriver and probe.
Accepts 2 1/4" belt (Not included).
Available in (L) left or (R) right hand side. Specify which side when ordering.
(Note: Color or shade of Pouch may be different from photo depending on leather supply.)
(Shipping Wt 1 lb 4 oz)
Only $39.95 + S & H Right Hand Side
Left Hand Side